Prezentare detaliată

<h2>Description</h2><p>Printing in PETG provides a sweet spot between PLA and ABS! PETG provides better strength and heat resistance than PLA while being less toxic and easier to print than ABS.</p><h3>Specifications</h3> Brand: Creality Model: CR-PETG Filament Diameter: 1.75mm<br/>Spool Outer Diameter: 20cm<br/>Spool Inner Diameter: 5.5cm<br/>Spool Height: 6.5cm Tensile Strength: 49MPa Net Weight: 1kg Gross Weight: 1.29kg <br/><h3>Recommended Printing Settings for CR-PETG:</h3><p>For optimal performance, set the following settings in your slicing software before printing.</p><p>For Bowden Extruder Printers (eg. Stock Ender 3/Pro/V2)<br/><br/></p><table><tbody><tr><td>Nozzle Temperature</td><td>240±5 C</td></tr><tr><td>Bed Temperature </td><td>90±5 C</td></tr><tr><td>Part Cooling Fan State</td><td>ON</td></tr><tr><td>Retraction Speed</td><td>60mm/s</td></tr><tr><td>Retraction Distance</td><td>8mm</td></tr><tr><td>Print Speed</td><td>40-50mm/s</td></tr><tr><td>Travel Speed</td><td>60mm/s</td></tr></tbody></table><p>For Direct Drive Extruder Printers</p><table><tbody><tr><td>Nozzle Temperature</td><td>240±5 C</td></tr><tr><td>Bed Temperature </td><td>90±5 C</td></tr><tr><td>Part Cooling Fan State</td><td>ON</td></tr><tr><td>Retraction Speed</td><td>60mm/s</td></tr><tr><td>Retraction Distance</td><td>6mm</td></tr><tr><td>Print Speed</td><td>40-50mm/s</td></tr><tr><td>Travel Speed</td><td>60mm/s</td></tr></tbody></table><br/>